Previous

PVC CEMENT TRAY (CURVE)

Previous

Solder Sucker (S) JL021

Solder Sucker (B) AX108

Brand: ZENS
Product Code: 102452
Availability: Out Of Stock
RM8.70

SUPERIOR QUALITY:

  1. Large capacity,powerful spring,simple operation,powerful solder sucker.
  2. One-touched cylinder and holder,which are easy to clean.
  3. The protector can make you safe to operate it
  4. Cleaned shaft can help the nozzle to remove the solder
  5. Protector - styled load mechanism is convenience to take along

OPERATION PROCEDURE:

  1. Push the set - knob for loading the cleaned shaft until the knob stops.
  2. Melt the solder where it is intended to remove.
  3. Aim the nozzle to the melted solder and then push the release button. Thus the solder can be sucked.
  4. Press the release button while pushing the setknob without reloading the cylinder.
  5. Push the set - knob and then pull the protector.the load mechanism is released.

CAUTION:

  1. Don't take down the nozzle mechanically.
  2. Don't let the solder fall into the nozzle adv - oiding short - circuit
  3. Don't use the damaged nozzle.


MAINTENANCE:

  1. Push the set - knob until it stops and then take down the nozzle.
  2. Stuff the nozzle tinht into the cylinder holedr, then press it gegtely toward the holder..
  3. Grasp the cylinder and shaft holder and turn it anti - clock wise, pull and remove it.
  4. Clean the piston and the inner cylinder with a brush and them.
  5. Be careful to examine and replace the nozzle if neccessary because the nozzle might be damaged if the solder is too hot.